An important read for those installing an Aquafire Original without a direct plumb kit. Please check that the water valve is in the off position before filling your Aquafire Original with water. If the water valve is left open and there is no direct

An important read for those installing an Aquafire Original without a direct plumb kit.Please check that the water valve is in the off position before filling your Aquafire Original with water. If the water valve is left open and there is no direct plumb kit attached, water will leak from this valve.&#xA0;<img src="https://attachments.gorgias.help/uploads.gorgias.io/PG09N6gmbp74j5gK/valve_open_with_text-b745fb31-ee22-4d54-8422-f7ea286bd374.jpg" style="width: 300px;" class="fr-fic fr-rounded fr-fil fr-dii"><img src="https://attachments.gorgias.help/uploads.gorgias.io/PG09N6gmbp74j5gK/valve_closed_with_text-75b92846-d4e1-4906-9ff8-4d271ea419e3.jpg" style="width: 300px;" class="fr-fic fr-dib fr-rounded" alt="help">

Installation without Direct Plumb Kits

There are multiple ways to control your Aquafire Original and Aquafire Pro. If you have a Smart Home system or would like to connect to a remote switch control, there is a Dry Contact Port on every Aquafire to assist with this type of installation. T

There are multiple ways to control your Aquafire Original and Aquafire Pro. If you have a Smart Home system or would like to connect to a remote switch control, there is a Dry Contact Port on every Aquafire to assist with this type of installation.&#xA0;The Dry Contact Port only controls the ON/OFF Function of the Aquafire Original or Aquafire Pro. It does not allow you to control the lights, flame height/speed or the dimming feature.&#xA0;<iframe width="100%" src="https://www.youtube.com/embed/tPMtkN3CsEk?&amp;wmode=opaque&amp;rel=0" frameborder="0" allowfullscreen class="fr-draggable"></iframe>

How to use the Dry Contact Port

Multiple Aquafires can be paired to one remote so that they turn on/off together, change flame height/speed together and change color together (Aquafire Pro Model only). To the outside, they appear as one seamless fireplace. Up to 8 burners can be pa

Multiple Aquafires can be paired to one remote so that they turn on/off together, change flame height/speed together and change color together (Aquafire Pro Model only). To the outside, they appear as one seamless fireplace. Up to 8 burners can be paired to one remote, that translates to 40 feet of flame!To pair multiple Aquafires to one remote, please follow the instructions below:<ol><li>Before turning the Aquafire off, make sure each Aquafire is on the same setting. We recommend turning everything to the lowest setting and picking the same LED color. This ensures all Aquafires will start from the same operating baseline when you press the ON/OFF button.&#xA0;</li><li>Choose 1 remote and press the power button to figure out which Aquafire it belongs to, then turn off that Aquafire. This is now your master Aquafire and remote.&#xA0;</li><li>Turn all Aquafires off.&#xA0;</li><li>Manually push and hold the power button on the Aquafire Control Panel (far right button) until it blinks (3-5 seconds), then release the power button.</li><li>While the power button is blinking, push any button on the remote. The Aquafire should power off and this completes the sync process.</li><li>Complete steps 3-4 for each Aquafire until all are paired to the Master Remote.&#xA0;</li></ol>

How do I control multiple Aquafires?

Vapor Pure Water Softener

Direct Plumb Kit

Please feel free to reach out to our Customer Experience Team via email anytime!

We're available weekdays, 9am to 4:30 PM EDT

Contact Us

Home

Aquafire